Helpful 10 Air Conditioning Tips For Fall You can Use

HVAC Air Conditioning System | Leimert Park Heating and Air

You must pay attention to your HVAC needs when the seasons’ change and the cool breezes start to blow, which is why Leimert Park Heating and Air is here. Therefore, it would help to prepare your home’s air conditioning for the upcoming fall weather with the aid of great air conditioning services. Here are some pointers, like heating and air maintenance tips, from our HVAC specialists:

  1. Prepare the HVAC Network for Winter

Winterizing your house as soon as the temperature rises above zero is ideal. Use these tips from professionals at Leimert Park Heating and Air:

  • Hire a specialist to clean the vents.
  • Purchase draft snakes to prevent warm air from leaking and vice versa.
  • Replace the air filter to reduce infections and allergens associated with autumn.
  • Reduce the water heater’s temperature and stay at around 170 degrees Fahrenheit.
  • Turn fans counterclockwise to save money on heating.
  • Properly insulate your pipes.
  • To save cash on heating, aim to re-caulk cracks and fix weatherstripping around the piping, foundation, and windows.
  1. Plan an HVAC Maintenance Examination

Such phone contact should be made periodically (ideally 3 – 4 months) to prevent emergencies and expensive, unanticipated replacements and fixes. A specialist needs to complete the following duties on the main HVAC network for the fall:

  • Examine electrical terminals, then tighten and clean them.
  • Clear the air ducts.
  • Lubricate motors and inspect belts for damages and tightness.
  • Verify the thermostat’s precision.
  • Verify the amount of refrigerant is acceptable.
  • Check the correct order of the electric controls.
  • Check for and fix duct leaks.
  • Examine the evaporator coil’s airflow.
  1. Modify the Thermostat’s Parameters

Modify the temperature values on the thermostat for your air conditioning unit whenever you adjust the time. You should adjust the temperature in chilly weather according to your comfort level.

We offer more tips here at, so stick around.

  1. Don’t Hesitate to Start the Heat

It can smell when you switch the heater on your HVAC unit for the first time in the fall. The dust accumulated on the heating elements during the past few months of stagnation is typically what gives off the burnt scent. It should disappear shortly. Make an AC service and maintenance technician your first contact if the heat won’t turn on.

  1. The Air Filter of Your Air Conditioner Should be Cleaned or Replaced

Clean and/or change the air conditioning device’s air filters monthly (and consistently whenever the season changes). This regimen lowers allergies and germs in your house while saving you around 5 and 15% of your electrical expenditure.

  1. Eliminate Any Organic Debris From the Area Surrounding the Condenser Device

Dirt, filth, weeds, and leaves accumulate surrounding the condenser device once summer ends. Throughout the cold seasons, this might impede clean airflow and reduce the performance of your HVAC unit.

Eliminate any natural detritus and trim excessively growing grass. Keep raking any grass cuttings, weeds, or leaves too.

  1. Clean the Coils on Your HVAC Device

During the summertime, your air conditioner’s condenser and evaporator coils acquire dirt off your lawnmower because the leaves change throughout the fall season. This debris restricts airflow and may lead your air conditioner to absorb heat. Eliminate any debris from the external region surrounding the coils.

  1. Turn Off the Power to the HVAC Device

Turning off the unit’s electricity eliminates the potential of condenser breakage if the thermostat is unintentionally adjusted to “cool” throughout the autumn season. Locate an external shut-off section near your condenser devices and flick the switch within.

  1. Increase the Insulation

Utilize foam pipe wraps to protect the exposed cabling and pipes of your air conditioning equipment, especially those that enter your household. Duct tape may also hold the foam insulation into place and prevent pipes from freezing over and splitting.

  1. Condenser, Evaporator Coils, and Condensate Lines Need to be Cleaned

Coils and lines become clogged with dirt or covered with dust and moisture, reducing the effectiveness of your device and maybe leading to failure. The filth will be more difficult to remove come spring, so go ahead and clean it today.

Ventilation networks and air conditioners are sophisticated systems with several components that might fail. Always be willing to hire reputable air conditioning services, like Leimert Park Heating and Air to help you out.

HVAC works and concerns can be tricky, but our technicians can handle them. We are happy to supply other blogs or articles on related HVAC topics, so please continue reading. For the booking of an appointment, you can call us now.